Search for BIOS driver & Firmware (enter vendor name or model):
|
431 results found |
1. Tyan - Thunder n3600B Bios 2.05 ...
Fixes:
Updated AGESA code to v3.5.0.0Added AMD Istanbul CPU supportAdded a Hypertransport configuration option to the bios menuAdded CPU Errata # 354
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., ftp://ftp.tyan.com/bios/S2927-E_v205.zip
BIOS/Tyan/Tyan-Thunder-n4250QE-Bios-207.shtml
ftp://ftp.tyan.com/bios/S2927-E_v205.zip |
2. Tyan - Thunder n3600S Bios 2.03 ...
Fixes:
Updated AMD AGESA code to v3.3.0.0Added AMD Shanghai CPU SupportUpdated MCP55 NVMM version to v4.082.13.Added L2 command capability when using the AFUDOS BIOS flash utilityUpdated CPU Micro codingUpdated the method in which Chassis intrusion functions and displays information during POSTUpdated the Fan failure method and information displayed during POSTFixed an issue where the system would not recover from a S3 wait state when using RHEL 5.2Updated the PWM Control functionsAdded AMD PowerCap function for deciding the highest performance P-state in OS.
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., ftp://ftp.tyan.com/BIOS/S2933_v203.zip
GRAPHICS-BOARD/INTEL/Tyan-Thunder-n3600M-Bios-205.shtml
ftp://ftp.tyan.com/BIOS/S2933_v203.zip |
3. Tyan - Transport PX22 (B2865) Bios 3.02 ...
* Updated AMD PowerNOW! support * Fixed an issue when auto fan control is disabled, it can't run 100% PWM * Fixed an issue where sometimes a system checksum error would appear when the system boots * Adjusted the CPU temperature display for great accuarcy * Changed Min PWM Temperature option from 35/40/45/50 to 30/35/40/45 ???C * Fan speed will be run 100% PWM at 60 degree if auto fan control enable It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., BIOS/Tyan/Tyan-Transport-FT48-B4985-E-Bios-200.shtml
ftp://ftp.tyan.com/bios/px22_b2865_302.zip
ftp://ftp.tyan.com/bios/px22_b2865_302.zip |
4. Tyan - Tempest i5400PW Bios 1.05 ...
Fixes:
Fixed an issue where the BIOS always add a BIOS SDR into the BMCFixed an issue where the DMI memory table information was incorrectFixed a no boot issue when Option ROM Placement "E000 by xxx" was selectedFixed an issue where the M3296 couldn’t read the SMBUS after S3 resumeFixed an issue where if Snoop Filter was set to [Enable], poor memory bandwidth would resultAdded support for NVIDIA Tesla devicesSet S1 as the default ACPI Suspend Type
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., ftp://ftp.tyan.com/BIOS/S5397_v105.zip
BIOS/Tyan/Tyan-Transport-FT48-B4985-Bios-102.shtml
ftp://ftp.tyan.com/BIOS/S5397_v105.zip |
5. Tyan - Transport FT48 (B4985) Bios 2.01 ...
* Updated to AGESA code to v3.1.1.0. * Added AMD Quad Core CPU Support * Fixed an issue where 1900MHz CPU's would not display their speed properly during POST It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., BIOS/Tyan/Tyan-Transport-FT48-B4985-Bios-100.shtml
ftp://ftp.tyan.com/BIOS/FT48_B4985_v201.zip
ftp://ftp.tyan.com/BIOS/FT48_B4985_v201.zip |
6. Tyan - Thunder n6650EX Bios 1.01c Beta ...
Fixes:
- Updated AGESA code to v3.3.0.1
- Updated the Hardware Monitor to prevent BMC reporting errors
- Fixed an issue where more LSI Fiber Channel cards could be used at once without I/O resource errors
- Fixed a “HT link training failure” (Erratum 354) error
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., BIOS/Tyan/Tyan-Transport-PX22-B2865-Bios-301.shtml
ftp://ftp.tyan.com/bios/S4992_v101c_beta.zip
ftp://ftp.tyan.com/bios/S4992_v101c_beta.zip |
7. Tyan - Thunder n3600B Bios 2.04 ...
Fixes:
- Updated AGESA code to v3.3.0.2
- Updated CPU support
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., ftp://ftp.tyan.com/bios/S2927-E_v204.zip
BIOS/Tyan/Tyan-Thunder-n4250QE-Bios-206F-Beta.shtml
ftp://ftp.tyan.com/bios/S2927-E_v204.zip |
8. Tyan - Tank FT48 (B5382) Bios 1.01 ...
* This is the first release BIOS It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., BIOS/Tyan/Tyan-Transport-FT48-B4985-Bios-103.shtml
ftp://ftp.tyan.com/BIOS/ft48_b5382_101.zip
ftp://ftp.tyan.com/BIOS/ft48_b5382_101.zip |
9. Tyan - Transport VX50 (B4985) Bios 2.03 ...
- Update AMD AGESA code to v3.1.7.0 - Added Endless Boot Option to bios - Fixed an endless POST loop (Post code 87 or 28) when ECC was set to Max, Super or Good modes - Fixed an endless POST loop if you [Enable] online spare - Fixed an issue where the system will hang at booting to an OS when the system is configured with only one piece memory on CPU node 3 - Fixed a Machine-Check Error report in LINUX (kernel 2.6.21) issue - Fix an issue where console redirection would fail after POST - Change the ECC Option default value to "Basic". - Added Hotkey when pressed will show the BIOS boot menu so user can specify a boot device - Added Hotkey when pressed forces LAN PXE boot - Added option to press key to bypass Memory count - Added keyboard POST error option so that if a keyboard error is found, then POST will continue and will not stop to show error if set to [Enable] - Fixed a console redirection display issue It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., BIOS/Tyan/Tyan-Tank-TA26-B5383-Bios-200.shtml
ftp://ftp.tyan.com/BIOS/VX50-B4985_v203.zip
ftp://ftp.tyan.com/BIOS/VX50-B4985_v203.zip |
10. Tyan - Tank TA26 (B5380) Bios 2.00 ...
* Fixed an issue where the system would give a post code error at boot (E4) if the M3291 SMDC card was installed * Updated CPU support It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., ftp://ftp.tyan.com/bios/TA26_B5380_v200.zip
BIOS/Tyan/Tyan-Transport-VX50-B4985-E-Bios-201.shtml
ftp://ftp.tyan.com/bios/TA26_B5380_v200.zip |
11. Tyan - Tank TA26 (B5383) Bios 1.01 ...
New features and Fixes : * This is the first release BIOS It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., BIOS/Tyan/Tyan-Transport-TA26-B2932-Bios-202.shtml
ftp://ftp.tyan.com/BIOS/ta26_b5383_101.zip
ftp://ftp.tyan.com/BIOS/ta26_b5383_101.zip |
12. Tyan - Transport VX50 (B4881) Bios 1.05 ...
* Fixed a CPU command bug for the SMDC card * Updated CPU temperature display * Updated the nVidia SATA RAID Option ROM to v5.60 * Fixed a SATA ATAPI boot issue * Fixed a Windows hang issue between the BMC & the Hardware * Updated the M4881 Hardware Monitor * Fixed a sensor error for the BMC * Fixed a Hot Key issue during Option ROM scans It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., BIOS/Tyan/Tyan-Transport-VX50-B4985-Bios-101.shtml
ftp://ftp.tyan.com/BIOS/vx50_b4881_105.zip
ftp://ftp.tyan.com/BIOS/vx50_b4881_105.zip |
13. Tyan - Transport TA26 (B3992-E) Bios 1.02 ...
* Updated the AGESA code to v3.1.3.1 * Added an option to Disable onboard VGA Warming Beep * Fixed "A Hyper Transport sync flood error occurred on last boot" warning message * Fixed an issue when you use over 4GB of memory and the memory hole size would not be listed properly It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., BIOS/Tyan/Tyan-Transport-VX50-B4881-Bios-103.shtml
ftp://ftp.tyan.com/bios/TA26_B3992-E_v102.zip
ftp://ftp.tyan.com/bios/TA26_B3992-E_v102.zip |
14. Tyan - Tank TA26 (B5380) Bios 1.04 ...
* Add item for set delay time before option ROM scan in Main Boot Features under POST Delay Time * Updated the MRC to v1.2 * Added the option "Halt on Errors:" Setup Item * Added support for the M2380 riser card * Updated the method that the system access memory It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., ftp://ftp.tyan.com/bios/ta26_b5380_104.zip
BIOS/Tyan/Tyan-Transport-VX50-B4881-Bios-106.shtml
ftp://ftp.tyan.com/bios/ta26_b5380_104.zip |
15. Tyan - Transport VX50 (B4985) Bios 2.01 ...
New features and Fixes: * Updated AMD AGESA code to v3.1.1.0. * Added AMD Quad Core CPU Support It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer., ftp://ftp.tyan.com/BIOS/VX50_B4985_v201.zip
BIOS/Tyan/Tyan-Transport-TX46-B4985-E-Bios-203.shtml
ftp://ftp.tyan.com/BIOS/VX50_B4985_v201.zip |
>1< 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 |
